Hydrostatic pressure tester 60-114

Equipment technical specification (diameter range from 10 to 114 mm, the length of the range of 2.5 ~ 12.5 m) 1. Summary of equipment The 60-114 hydrostatic pressure testing machine adopts big clearance seal way, 10 to 60 using small gap seal, seal pressure is oil-water supercharger turbo, high pressure reciprocating testing pump pressure for the pressure pipe body.The automation control adopts Siemens PLC center control, realizing automatic, semi-automatic, etc.The pipe pressure curve and data record are fully automatic save, query and printing are convenient.The equipment can satisfy the pipe diameter range phi 10 ~ phi 114mm, 2.5 ~ 12.5m long pipe test pressure, 2. Main technical index 1, applicable steel pipe: outer diameter:?10 ~?114mm length: 25. ~ 12.5m steel pipe weight: heaviest 300kg/branch 2, maximum test pressure: 75MPa (pressure detection accuracy is less than 2%);Common pressure is greater than 70 MPa 3 and pressure protection time: 5 ~ 300s (adjustable timing).Pressure drop in the 5s: the tube pressure is less than 2% when the pressure is greater than 25MPa, and the tube pressure is less than or equal to 0.5MPa when the pressure is less than 25MPa (without the pressure compensation);4. Average work efficiency: 80-100 branches/hour (10s for water filling time);5. Pressurization of oil and water supercharger and high pressure reciprocating pressure pump;6. In vitro surface seal 60--114 with large gap polyurethane sealing ring;10-60 adopts small clearance seal mode 7, automatic processing of test data, curve generation, saving, printing, and output work energy;8. Installed power: 80kw;9. Equipment weight: about 26 tons (plus or minus 2%);10. Land area: 10m x 25m (including the entry and exit rack);11. System oil pressure (active)Under 12, environmental conditions: at an altitude of 1000 m, indoor use, temperature 0 ℃ to 40 ℃, relative humidity of 90% or less;